PMDX Forum

General Category => SmartBOB controllers and dedicated accessories => Topic started by: sjwiehe on April 29, 2017, 01:45:42 PM

Title: PMDX-424 SmartBob No Green LED
Post by: sjwiehe on April 29, 2017, 01:45:42 PM

I just installed and powered up the 424.  I have power to the board as the Red LED is lit as well as the yellow Power LED.  The green LED is dark and never lights. 

I've removed all connections to the board other than power and the estop  and the green LED still doesn't light.  The board has never been run before as it was just installed.

Next steps or advice?

Thanks

Steve

Title: Re: PMDX-424 SmartBob No Green LED
Post by: Steve Stallings on May 14, 2017, 10:50:42 PM

This board was returned for warranty repair and was found to
indeed have a problem. Amazingly it was just the circuit that
drove the LED. The board otherwise functioned as expected.
It has been fixed and returned to the customer under warranty.