PMDX Forum
General Category => Generic Spindle interfaces, I/O boards, Misc boards and panels => Topic started by: Analias on March 17, 2018, 07:04:12 PM
-
I have a PMDX-179-PAN that I had originally thought to mount on the side of my controller cabinet. Since then I have added a touch display along side my CRP-4848 and thought it might be nice to mount the PMDX-179-PAN up next to the display where it could be easily accessed. It looks like the panel uses 4 1/2" spacing for the mounting holes. Does this match any known standard enclosure specifications that I can go online and look for? Unfortunately, I does not look like it will fit a 2 gang electrical outlet/switch box which is only four inches wide.
-Freeman