PMDX Forum

General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: OldePhart on December 26, 2018, 04:04:54 PM

Title: Are there line drawings of the PMDX boards
Post by: OldePhart on December 26, 2018, 04:04:54 PM

I want to create a electrical drawing of my system, Are there line drawings of the -126, and -107 boards somewhere? Not a board schematic, though I wouldn't turn that down, more like a board drawing with the connectors labeled so I can draw lines from each component to the next.

Title: Re: Are there line drawings of the PMDX boards
Post by: 12strings on January 06, 2019, 11:22:10 PM

Once long ago there was a thread somewhere on this forum where the person had posted a really nice drawing of a PMDX-126 with all the screw terminals labeled.

I'm not sure this is the one I'm thinking of, but it is the best I could find in a quick search.

https://www.pmdx.com/PMDX-Forums/index.php?topic=418.msg1823#msg1823

Not quite as complete:

https://www.pmdx.com/PMDX-Forums/index.php?topic=106.msg1754#msg1754

Search for "schematic" seems to give the best hits.

Title: Re: Are there line drawings of the PMDX boards
Post by: OldePhart on February 02, 2019, 07:51:04 PM

Thought I thanked you for this reply but I see no evidence of that, apologies.

Title: Re: Are there line drawings of the PMDX boards
Post by: Amptroll on September 22, 2019, 11:17:09 PM

Hi I am Amptroll.  I am new to this Forum.  Just purchased my CNC Router, with ESS, PMDX-126, PMDX-107.
I am pretty handy with most 3-D CAD and I am going to model the PMDX-126 anyway, for my control box model
so I will make it available for the forum as my first contribution.  I know this post is 120 days+ or older, but
I thought I would make the offer in good will nature.  I reply again to this post once its done.  Give me a week or so.
Rob

Title: Re: Are there line drawings of the PMDX boards
Post by: OldePhart on September 23, 2019, 08:48:09 AM

That would be a welcome addition - thanks in advance.