PMDX Forum

General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: xyamom@gmail.com on November 16, 2019, 08:24:04 AM

Title: I'm looking to buy a PMDX-416 just had one question
Post by: xyamom@gmail.com on November 16, 2019, 08:24:04 AM

I have built a couple cncs  in the past with just printer ports.
I was looking for something to interface with USB and I found you guys I was looking at the PMDX-416 my question is can you use a PMDX-134 and PMDX-407 on a pmdx-416 (at the same time do the stack? )  also wanted to use the ribbon cable for the pmdx-134 . Thanks

Title: Re: I'm looking to buy a PMDX-416 just had one question
Post by: administrator on November 17, 2019, 10:12:39 AM

Yes, these items can all be used at the same time. The PMDX-407 plugs directly into the PMDX-416 and has a pass thru ribbon header for the cable to the PMDX-134.