PMDX Forum

General Category => SmartBOB controllers and dedicated accessories => Topic started by: stew on January 26, 2020, 11:33:25 PM

Title: Mach 4 loader Error
Post by: stew on January 26, 2020, 11:33:25 PM

Hello,
When I try to load the PMDX 424 Sample I get and error,

The screen set "screens\wx4.set" does not exist.

What's wrong?

Thanks

Title: Re: Mach 4 loader Error
Post by: 12strings on January 27, 2020, 12:42:20 AM

What version of Mach4 are you running?

At least up through build 4300, there that screen set should exist.  Presuming you installed Mach4 in the default directory, if you look in the c:\Mach4Hobby\Screens directory you should see a handful of files, including "wx4.set", "wx6.set", "wxLathe.set", etc.

If you don't see those, your Mach4 install may be corrupt.  You can try re-installing Mach4 and see if the files appear.

Title: Re: Mach 4 loader Error
Post by: stew on January 27, 2020, 11:11:56 PM

Your right 12strings, the .set files were not there. I transferred them from a another PC running Demo Mach5 and all is good.
Thank you.