PMDX Forum
General Category => General Discussion => Topic started by: carpa1970 on September 06, 2022, 01:28:16 AM
-
good morning, kindly, I need some advice!
I already have a (Chinese) servo motor that I would like to use as a spindle for a small lathe (Emco compact 5 cnc)!
which board should I buy to have M3, M4 control of the spindle servo with the ability to run G76 and G84 on the lathe?! if possible, also run the small original ATC 6 tools
thank you
-
The servo motor driver interface will determine what sort of control signals are needed.
The tool changer is a rachet mechanism run by a small motor. You will need to write a macro to sequence operations.
G76 threading operations rely on spindle position feedback to synchronize Z axis movement to the spindle, not the other way around. Threading does not utilize spindle speed control to do this.
I suggest you join this forum for lots of useful information:
https://groups.io/g/Emco-CNC-Users/topics