Messages

1

SmartBOB controllers and dedicated accessories / Re: No synchronized position from motion planner

« on: January 08, 2021, 05:40:08 PM »

i get it right out the gate upon start up, as well as probing but that might be because of the enable if probe not found errors

i have to press enable twice.

2021-01-08 14:31:23.799 - Logging Enabled.
2021-01-08 14:31:26.694 - API: mcCntlReset(inst = 0) (Mach4GUI LUA script)
2021-01-08 14:31:26.799 - SoftSync()! Clearing planner. controller.cpp:2228
2021-01-08 14:31:26.803 - API: mcSpindleSetDirection(inst = 0, dir = 0) (Mach4GUI LUA script)
2021-01-08 14:31:27.314 - API: mcCntlCycleStop(inst = 0) (Mach4GUI LUA script)
2021-01-08 14:31:27.315 - API: mcSpindleSetDirection(inst = 0, dir = 0) (Mach4GUI LUA script)
2021-01-08 14:31:28.030 - API: mcCntlEnable(inst = 0, FALSE) (Mach4GUI Button)
2021-01-08 14:31:28.033 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2021-01-08 14:31:28.033 - Signal id 1019, (Enable #1), changed from HIGH to LOW.
2021-01-08 14:31:28.033 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2021-01-08 14:31:28.033 - Signal id 1021, (Enable #3), changed from HIGH to LOW.
2021-01-08 14:31:28.033 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2021-01-08 14:31:28.035 - API: mcMotionClearPlanner(inst = 0) (PMDX-SmartBOB-USB)
2021-01-08 14:31:28.054 - API: mcMotionSync(inst = 0) (PMDX-SmartBOB-USB)
2021-01-08 14:31:28.054 - SyncPosition()! Clearing planner.
2021-01-08 14:31:30.305 - API: mcCntlEnable(inst = 0, TRUE) (Mach4GUI Button)
2021-01-08 14:31:30.306 - Signal id 1018, (Enable #0), changed from LOW to HIGH.
2021-01-08 14:31:30.307 - Signal id 1019, (Enable #1), changed from LOW to HIGH.
2021-01-08 14:31:30.307 - Signal id 1020, (Enable #2), changed from LOW to HIGH.
2021-01-08 14:31:30.308 - Signal id 1021, (Enable #3), changed from LOW to HIGH.
2021-01-08 14:31:30.308 - Signal id 1120, (Machine Enabled), changed from LOW to HIGH.
2021-01-08 14:31:30.313 - SoftSync()! Clearing planner. controller.cpp:5107
2021-01-08 14:31:30.317 - API: mcCntlEnable(inst = 0, FALSE) (PMDX-SmartBOB-USB)
2021-01-08 14:31:30.318 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2021-01-08 14:31:30.319 - Signal id 1019, (Enable #1), changed from HIGH to LOW.
2021-01-08 14:31:30.319 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2021-01-08 14:31:30.320 - Signal id 1021, (Enable #3), changed from HIGH to LOW.
2021-01-08 14:31:30.320 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2021-01-08 14:31:34.091 - API: mcCntlEnable(inst = 0, TRUE) (Mach4GUI Button)
2021-01-08 14:31:34.093 - Signal id 1018, (Enable #0), changed from LOW to HIGH.
2021-01-08 14:31:34.093 - Signal id 1019, (Enable #1), changed from LOW to HIGH.
2021-01-08 14:31:34.093 - Signal id 1020, (Enable #2), changed from LOW to HIGH.
2021-01-08 14:31:34.094 - Signal id 1021, (Enable #3), changed from LOW to HIGH.
2021-01-08 14:31:34.094 - Signal id 1120, (Machine Enabled), changed from LOW to HIGH.
2021-01-08 14:31:34.098 - SoftSync()! Clearing planner. controller.cpp:5107
2021-01-08 14:32:07.612 - API: mcCntlEnable(inst = 0, FALSE) (Mach4GUI Button)
2021-01-08 14:32:07.614 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2021-01-08 14:32:07.614 - Signal id 1019, (Enable #1), changed from HIGH to LOW.
2021-01-08 14:32:07.615 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2021-01-08 14:32:07.615 - Signal id 1021, (Enable #3), changed from HIGH to LOW.
2021-01-08 14:32:07.616 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2021-01-08 14:32:07.619 - API: mcMotionClearPlanner(inst = 0) (PMDX-SmartBOB-USB)
2021-01-08 14:32:07.639 - API: mcMotionSync(inst = 0) (PMDX-SmartBOB-USB)
2021-01-08 14:32:07.639 - SyncPosition()! Clearing planner.
2021-01-08 14:32:12.101 - API: mcCntlEnable(inst = 0, TRUE) (Mach4GUI Button)
2021-01-08 14:32:12.102 - Signal id 1018, (Enable #0), changed from LOW to HIGH.
2021-01-08 14:32:12.103 - Signal id 1019, (Enable #1), changed from LOW to HIGH.
2021-01-08 14:32:12.103 - Signal id 1020, (Enable #2), changed from LOW to HIGH.
2021-01-08 14:32:12.103 - Signal id 1021, (Enable #3), changed from LOW to HIGH.
2021-01-08 14:32:12.104 - Signal id 1120, (Machine Enabled), changed from LOW to HIGH.
2021-01-08 14:32:12.108 - SoftSync()! Clearing planner. controller.cpp:5107
2021-01-08 14:32:12.120 - API: mcCntlEnable(inst = 0, FALSE) (PMDX-SmartBOB-USB)
2021-01-08 14:32:12.121 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2021-01-08 14:32:12.122 - Signal id 1019, (Enable #1), changed from HIGH to LOW.
2021-01-08 14:32:12.122 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2021-01-08 14:32:12.123 - Signal id 1021, (Enable #3), changed from HIGH to LOW.
2021-01-08 14:32:12.123 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2021-01-08 14:32:16.299 - API: mcCntlEnable(inst = 0, TRUE) (Mach4GUI Button)
2021-01-08 14:32:16.300 - Signal id 1018, (Enable #0), changed from LOW to HIGH.
2021-01-08 14:32:16.300 - Signal id 1019, (Enable #1), changed from LOW to HIGH.
2021-01-08 14:32:16.301 - Signal id 1020, (Enable #2), changed from LOW to HIGH.
2021-01-08 14:32:16.301 - Signal id 1021, (Enable #3), changed from LOW to HIGH.
2021-01-08 14:32:16.302 - Signal id 1120, (Machine Enabled), changed from LOW to HIGH.
2021-01-08 14:32:16.306 - SoftSync()! Clearing planner. controller.cpp:5107