1
Boards for use with LinuxCNC or MachineKit / Re: PMDX-126 with LinuxCNC and charge pump
« on: June 22, 2018, 11:03:53 PM »
My solution, at least temporarily was to switch over to MACH3 which can deal with that problem (feature). It's been a month since I dealt with that. In that month I've been rebuilding the power supply and control cabinet and all sorts of other things so at the moment nothing is wired up. I had to abandon the BeagleBone Black using the BBB-DB25/26 from Xylotex running MachineKit because their hardware couldn't deal with NC limit switches. Not without modifying the board. And I'm not prepared to manually turn pulleys to back off the limit switches as was suggested. So for now I'm back to a dual core PC that runs either MACH3 or LinuxCNC. Once I have the machine put back together and wired and making chips with MACH3 I'll take another look at LinuxCNC.
Thanks for your reply.
John
Thanks for your reply.
John