Most boards have an introduce yourself forum so here goes:
Hi there allow me to introduce myself.
Will Davis, retired test engineer living in Malahide, Dublin, Ireland. Have been cutting metal as a model engineer since the late 70s on a trusty Myford ML7.
Bought a Sieg SX2 Plus mill and have converted it to CNC. My problem is the controller I have been using (DDCSV1.1, linux based box) is not really capable of running a mill as it lacks a lot of G and M codes. Having spent a lot of money so far I really need something I can trust to interface my Fusion 360 designs to an end-mill.
Some of the g-code output by F360 is not appreciated by my controller!
I certainly don't want to hand edit F360 g-code
So for only $400 or so I intend to get Mach4Hobby and a PMDX-416 USB controller
Expect a lot of questions!!
Will Davis
