« previous next »
Pages: [1]

Author Topic: Terminal Plug Connect for PMDX-132  (Read 3689 times)

lthomps

  • Posts: 12
    • View Profile
Terminal Plug Connect for PMDX-132
« on: February 01, 2016, 11:00:54 AM »
I have a legacy PMDX-132 motherboard that I am using as a 3axis currently and I am adding a 4th axis.  Does anyone know where I can get 4pin terminal plugs for it.  I have no idea where I got the existing plugs I have from.  I purchased the 4pin plugs from PMDX, but the pin distance is too short.  They need to be 5mm. 
Logged

Bob at PMDX

  • Administrator
  • Posts: 368
    • View Profile
    • PMDX
Re: Terminal Plug Connect for PMDX-132
« Reply #1 on: February 01, 2016, 11:54:34 AM »
The only 4-pin screw terminal connectors that we sell are for the PMDX-340.  Are you talking about the 4-pin connector that you install on the Geckodrive unit for the motor wires?  If so, these came with the PDMX-132.  I can look around the lab and see if we still have any.  If so, we can send them back to you with your PMDX-422 board(s) when you send them in for repair.

Bob
Logged
Engineering Hell: Everything's right and nothing works.
Bob's Corollary: If everything's right and nothing works, double check your assumptions.

lthomps

  • Posts: 12
    • View Profile
Re: Terminal Plug Connect for PMDX-132
« Reply #2 on: February 01, 2016, 12:06:18 PM »
Yep, those are the ones I am referring to.  Thanks
Logged
Pages: [1]
« previous next »