The Mach4Hobby plugin for the SmartBOB-USB family of controllers has been updated to version 0.36.171, released 28 January 2016. This plug-in tested with Mach4 builds 2313 through 2803 and should work with later builds unless the API is changed..
New features since Version 0.33.159:
Added information to debug log for comms error debugging
Add support for PMDX-424 SmartBOB-ISO-USB
The green LED now has a different flash pattern when waiting for a connection from the plug-in. While waiting for the plug-in the LED flashes one short flash every 2 seconds. When the device is connected to the plug-in the green LED will flash on for 1 second and off for 1 second. On the PMDX-410, PMDX-422 and PMDX-424 this is the green LED that is just under the red LED.
Bug Fixes Since Version 0.33.159:
Fixed bug that corrupted the polling timer interval
Fixed a bug in the homing code that caused an "Error 7" in certain situations
Prevent spindle INDEX input messages from flooding the debug log and crashing Mach4
Full details HERE:
http://www.pmdx.com/Downloads_/ReleaseNotes_Ver_0_36_171.htmlThis updated plug-in can be downloaded HERE:
http://www.pmdx.com/PMDX-SmartBOB-USB-Plug-In
