Hi,
I have a very bizarre issue with Z axis creeping with Mach 4. It seems to happen after say 10mins of routing. Mach 4 does not ask the Z axis to move while routing on the same plane, but all of a sudden, the Z axis starts to creep into the job. It initially starts creeping .1mm per pass until it is trying to chomp 2-3mm per pass. Mach 4 reports no change in Z height, but the servo is being asked to descend into the job when it shouldn't. For small jobs there is no problem, but as soon as this 'creep' issue starts to occur it compounds and ruins a job within about 20sec when things start to go wrong.
The X and Y axis seem to have no problems and they are the exact same setup.
Has anyone else come across this issue? I've ruined about 4 jobs now and its starting to get a bit old...
Would love to know how to fix it!